Rear Camber Links

Our camber links allow for independant adjustment of camber on each rear wheel. They replace the non adjustable OEM links found at the rear control arm inner mounting point. They can be lengthened to increase negative camber or shortened to reduce it. Our links are manufactured 6061-T6 aluminum and 303 stainless steel. The spherical rod end is teflon lined and made from chrome-moly steel with a hard chrome finish.

THESE LINKS ARE NOT COMPATABLE WITH DELRIN OR POLYURETHANE REAR CONTROL ARM BUSHINGS. THEY MAY BE USED WITH OEM RUBBER CONTROL ARM BUSHINGS OR WITH MMR SPHERICAL CONTROL ARM BEARINGS.

Price: $125

Part #FC3SSL2001

S5 Lower Shifter Bushing

This is a Delrin replacement for the stock S5 lower shifter bushing. This bushing replaces the OEM rubber bushing found between the shifter ball and shifter socket in S5 turbo and non-turbo manual transmissions. This bushings provides a low cost replacement for the OEM bushing which is not usually available seperately.

Price: $12

Part #FC3SDB2003

Spherical Rear Control Arm Bearings

Our spherical bearing kits allow for totally adjustable rear camber and toe while providing a near frictionless pivot point for the rear control arms. The housings are machined out of high strength 2011-T3 anodized aluminum. The bearings are Teflon lined for zero mantiance operation and the housings are zinc plated for corrosion protection. The bearings are positively retained with C clips allowing for easy removal of the bearing assembly and quick replacement of the spherical bearing.

Price: $160

Part # FC3SSB4001

Rear Subframe Spacers

MMR Rear subframe spacers for the FC Rx-7. Our rear subframe spacers are the perfect solution for FC owners looking for an easy way to reduce subframe movement. Installation takes less than an hour and can be accomplished with basic tools. The spacers are machined out of 2011-T3 aluminum and clear anodized. Installation instructions can be found under Tech Articles.

Price: $50

Part # FC3SSB2201

Front Control Arm Bushings

       Delrin/UHMW front control arm bushing set.  Small (front) bushings are made from Delrin while Large (rear) bushings are made from UHMW.   Includes new inner liners for the small bushings. 

Price: $80

Part # FC3SSB100A

Rear Control Arm Bushings

     Rear control arm bushings are made from Delrin and reduce camber and toe changes under acceleration, cornering and braking. Includes new inner liners. 

Price: $50

Part # FC3SSB2001

DTSS Eliminators

     Eliminates rear steer feature in the stock rear suspension.   

Price: $40

Part # FC3SSB2002

Rear Subframe Mounts

     Solid rear subframe bushings reduce subframe movement and improve handling.  Machined from UHMW.  

Price: $55

Part # FC3SSM2001

Rear Differential Mounts

    Machined from BLACK UHMW Polyethylene. These mounts are much harder than polyurethane or rubber. They replace the rubber mounts on the BACK of the differential. These mounts will help to reduce differential movement and front mount breakage during acceleration. They fit all FC Rx-7s. Set includes 2 mounts.

Price: $50

Part # FC3SDM3001

Engine Mounts

    Mounts install in place stock rubber engine mounts.  Feature an Aluminum core incased in UHMW.  Fully threaded rod extends all the way through the mount so that mount breakage is eliminated.  Mounts produce more vibration than stock, but not as much as solid metal mounts.   Includes new hardware.

Price: $60

Part # FC3SDM1001

Transmission Mounts

    Mounts install in place stock rubber transmission mounts.  Feature an Aluminum core incased in UHMW.  Fully threaded rod extends all the way through the mount so that mount breakage is eliminated.  Mounts produce more vibration than stock, but not as much as solid metal mounts.   Includes new stainless hardware.

Price: $37.50

Part # FC3SDM2001

Complete Suspension Bushing Set  

    Includes front and rear control arm bushings, DTSS Eliminators, and rear subframe mounts. 

Price: $210

Part # FC3SSBSET

Complete Drivetrain Mount Set  

    Includes engine mounts, transmission mounts, and differential mounts listed above. 

Price: $135

Part # FC3SDMSET